Dongguan Tuancheng Automation Equipment Co., Ltd

to promote the development of China’s intelligent generator. Our vision: to make each generator in the world has an intelligent heart.

25895
Like
Product
LIXiSE EFC3037359 speed controller
5 stars
RPM Stability <±0.25% 
Speed Range 1KHz ~ 6.5KHz 
Thermal Stability Max ±0.7% 
IDLE Regulation 260 ±20Hz 
DROOP Regulation Minimum 15Hz ±6Hz/ 1 Amp 
Maximum:  400Hz ±75Hz/ 1 Amp    
External Speed Regulation  ±200Hz  (with 1 KΩ connected) 
AUX Input Sensitivity  148Hz / 1V., ±10Hz 
Impedance  1MΩ 
Working Temp Range  -40 ~ 85 °C
ENVIRONMENT
Working Humidity Range  Maximum 95% 
Stocking Temp  -55 ~ 92 °C
Shocking 20-100HZ  500mm/Sec. 
INPUT POWER SUPPLY
Voltage  24V 
Grounding Pole  Negative pole 
Power Supply 40mA 
Actuator Continuous Current    Minimum 1A, Maximum 4.5A 
MPU
Signal 2 ~ 120V RMS 

 

NOTE: Above-Mentioned parameters are tested with a 3800Hz working frequency.


Purchase Quantity:

Tags:

EFC3037359 is a engine speed controller designed by all electronic device for CUMMINS’s actuator, It can fast and precise response to transient load changes. It has a wide speed control range. For these controllers, separate circuits allow adjustments of proportional, integral and derivative values. These parameters all work together to provide a control that results in fast and stable engine response to load changes  while maintaining precise speed regulation of diesel. It is normally closed, low flow .

speed control suitable for generaror

Semiconductor power devices : All imported IC

RPM Stability <±0.25% 
Speed Range 1KHz ~ 6.5KHz 
Thermal Stability Max ±0.7% 
IDLE Regulation 260 ±20Hz 
DROOP Regulation Minimum 15Hz ±6Hz/ 1 Amp 
Maximum:  400Hz ±75Hz/ 1 Amp    
External Speed Regulation  ±200Hz  (with 1 KΩ connected) 
AUX Input Sensitivity  148Hz / 1V., ±10Hz 
Impedance  1MΩ 
Working Temp Range  -40 ~ 85 °C
ENVIRONMENT
Working Humidity Range  Maximum 95% 
Stocking Temp  -55 ~ 92 °C
Shocking 20-100HZ  500mm/Sec. 
INPUT POWER SUPPLY
Voltage  24V 
Grounding Pole  Negative pole 
Power Supply 40mA 
Actuator Continuous Current    Minimum 1A, Maximum 4.5A 
MPU
Signal 2 ~ 120V RMS 

 

NOTE: Above-Mentioned parameters are tested with a 3800Hz working frequency.

Quotation
Message
Follow Us
Help
Top