The 800Amps parallel cabinet shown in the figure is for the parallel operation of two units standby rated 550KVA gensets. The parallel cabinet and its system can realize parallel operation of multiple generator sets and / or grid-connected operation with mains. The parallel system of our company can be equipped with ComAp controller, DeepSea controller, Deif controller, ABB circuit breaker and Delixi circuit breaker. It can be configured with complex redundant parallel control system.

The main functions of the cabinet:

1. Automatic synchronization and closing;

2. Automatic load distribution;

3. Constant power factor function when connected to the grid;

4. Protection function;

1) Synchronous protection;

2) Overcurrent protection;

3) Reverse power protection;

4) Over power protection;

5) Over and under voltage protection;

6) Unit failure protection;

7) Emergency stop;

8) Low oil pressure;

9) Overspeed;

10) High water temperature (water cooling unit);

11) Low oil level;

12) Three startup failures.

5. Telemetry function:

1) Three-phase output voltage;

2) Three-phase output current;

3) Output frequency / speed;

4) Lubricating oil pressure;

5) Lubricating oil temperature;

6) Start battery voltage;

7) Output active power;

8) Reactive power;

9) Power factor;

10) Running time;

11) City power monitoring, etc.

6. Remote control function:Fault, reset, start, stop, load, emergency stop, emergency stop, etc.