|Product Type:||Blouses & Tops|
|Supply Type:||OEM service|
|Top Type:||Shirt / Blouse|
100X-10/16Q Remote control ball float valve overview:
100X remote control floating ball valve is also called 100X diaphragm remote control floating ball valve, 100X remote control floating ball valve by the main valve, needle valve, ball valve, floating ball valve, micro filter and other hydraulic control pipe system, set, automatic control of liquid level height. This product directly uses the liquid level control, does not need other devices and energy, easy maintenance, the liquid level control accuracy is high, not affected by water pressure, reliable sealing.
The 100X remote control ball float valve is a multi-function hydraulic operated valve. To be installed at the water inlet of the pool or elevated water tower, when the water level reaches the set height, the main valve is controlled by the floating ball pilot valve to close the water inlet to stop the water supply; When the water level drops, the main valve and the ball float switch control to open the water inlet to the pool to achieve automatic water refill. Precise level control, without interference by water pressure.
100X-10/16Q Remote control ball float valve working principle:
When the pipeline supplies water from the inlet end, because the needle valve, ball valve and float ball valve are normally open, the water enters the pool through the micro filter, needle valve, control room, ball valve and float ball valve. At this time, the control room does not form pressure, the main valve opens, and the water tower (pool) supplies water.
When the water level of the water tower (pool) rises to the set height, the floating ball floats and closes the floating ball valve, the water pressure in the control room increases, and the main valve is pushed to close, and the water supply stops. When the water surface drops, the float ball valve is reopened, the water pressure in the control room drops, and the main valve is opened again to continue the water supply and maintain the set height of the liquid level.
100X-10/16Q Remote control ball float
Remote control ball float valve products are widely used in high-rise buildings, living areas and other water supply network system of water tower, pool and other facilities of liquid level control.
100X-10/16Q Remote control ball float valve
Urban construction, chemical industry, metallurgy, petroleum, pharmaceutical, food, beverage, environmental protection
100X-10/16Q Remote control ball float structure features:
Hydraulic control valve is a valve controlled by water pressure. It consists of a main valve and its attached conduit, pilot valve, needle valve, ball valve and pressure gauge. According to the purpose of use, function into the different evolution of remote control ball float valve, pressure reducing valve, slow closing check valve, flow control valve, pressure relief valve, hydraulic electric control valve, etc. Hydraulic control valve is divided into diaphragm type and piston type two types, the working principle is the same, the above floating pressure difference △P as the power,
Controlled by the pilot valve, so that the diaphragm (piston) hydraulic differential operation, completely by hydraulic automatic regulation, so that the main valve disc fully open or completely closed or in the state of regulation. When the pressure water into the diaphragm (piston) above the control room is discharged to the atmosphere or downstream low pressure area, acting on the bottom of the disc and below the diaphragm pressure value is greater than the lower pressure value, so the main valve disc pressure to the completely closed position; When the pressure in the control room above the diaphragm (piston) is in the middle of the inlet pressure and the outlet pressure, the main valve disc is in the adjustable state. Its adjustment position depends on the combined control of the needle valve and the adjustable pilot valve in the duct system. The adjustable pilot valve can open or close its own small valve port through the downstream pressure and changes with it, thus changing the pressure value of the control room above the diaphragm (piston), control the main valve disc adjustment position,