Generator accessories DSE501K controller key start module parameter description model: DSE501K-1 trademark: KIECON electronic output: 100000 detailed introduction controller DSE501K function features: basic type engine start control mode, engine Start and stop are controlled by the key on the panel, with low oil pressure, high water temperature, overspeed and auxiliary input turn-off protection and corresponding LED indicator. Specification: DC POWER SUPPLY: 9T TO 33V continuous start-up voltage drop: start-up to automatically maintain voltage, this allows the generator input range without a built-in battery: 15-305V AC RMS GENERATOR INPUT FREQUENCY: 50-60hz at rated engine speed. Magnetic Sensor Input Range: 0.5 V to /-80 v Magnetic Input Frequency: 2300 hz to 6000 H at rated engine speed start relay output: 16 Amp DC at system voltage. Operation relay output: 16 Amp DC at system voltage. Report output: 1 Amp DC at system voltage. DIMENSIONS: 72X 72x 118.5(excluding key switch) operating temperature range:-30 To 70 ° C mounting: Mounting on front panel through suitable openings and fixtures. The wires are connected by a plug with a lock and a socket-shaped connector. Outer Packing size (length * Width * Height) : 175 * 83 * 85 product size (length * Width * Height) : 140 * 72 * 67 calibration: The speed release point and tachometer can be calibrated from the rear panel of the module via the potentiometer above. Panel failure indicator: 1. Emergency shutdown/2. Unit overspeed/3. Oil Pressure low/4. Water temperature/5. Charging failure, input and output contacts: 1. Report output, 2. Fuel output, 3. Auxiliary Power Supply, 4. Start output, 5. Power Positive 6. Power Negative, 7. Emergency Shutdown, 8. Low Oil pressure shutdown, 9. High water temperature shutdown, 10. Charge check 11/12. External frequency output indicator, 13. AC l-line, 14. AC N line. Outer Packing size (length * Width * Height) : 175 * 85 * 85mm weight: 420G (including packing)